pppoe connection configuration in cisco router 1800 and 2900 | PPPoe with Nat policy apply
#PPPoE pppoe connection configuration in #cisco router 1800 and 2900 | PPPoe with Nat policy apply, The PPPoE Client feature on the router provides PPPoE client support on Ethernet interfaces. A dialer interface must be used for cloning virtual access. Multiple PPPoE client sessions can be configured on an Ethernet interface, but each session must use a separate dialer interface and a separate dialer pool. A PPPoE session is initiated on the client side by the Cisco 1800, 2900 or Cisco 870 series router.An established PPPoE client session can be terminated in one of two ways: By entering the clear vpdn tunnel pppoe command. The PPPoE client session terminates, and the PPPoE client immediately tries to reestablish the session. This also occurs if the session has a timeout. By entering the no pppoe-client dial-pool number command to clear the session. The PPPoE client does not attempt to reestablish the session. #NAT (represented as the dashed line at the edge of the Cisco router) signifies two addressing domains and the inside source address. The source list defines how the packet travels through the network. https://www.cisco.com/c/en/us/td/docs/routers/access/1800/1801/software/configuration/guide/scg/pppoenat.html
#PPPoE pppoe connection configuration in #cisco router 1800 and 2900 | PPPoe with Nat policy apply, The PPPoE Client feature on the router provides PPPoE client support on Ethernet interfaces. A dialer interface must be used for cloning virtual access. Multiple PPPoE client sessions can be configured on an Ethernet interface, but each session must use a separate dialer interface and a separate dialer pool. A PPPoE session is initiated on the client side by the Cisco 1800, 2900 or Cisco 870 series router.An established PPPoE client session can be terminated in one of two ways: By entering the clear vpdn tunnel pppoe command. The PPPoE client session terminates, and the PPPoE client immediately tries to reestablish the session. This also occurs if the session has a timeout. By entering the no pppoe-client dial-pool number command to clear the session. The PPPoE client does not attempt to reestablish the session. #NAT (represented as the dashed line at the edge of the Cisco router) signifies two addressing domains and the inside source address. The source list defines how the packet travels through the network. https://www.cisco.com/c/en/us/td/docs/routers/access/1800/1801/software/configuration/guide/scg/pppoenat.html