CraftBot 3D printer: 4 to 1 Splitter - 11/5/15
Source: www.thingiverse.com/thing:771827 #CraftBot 3D printer from #CraftUnique. Slicer: Cura 15.02.01 Print time: 22m Quality In mm Layer height: 0.3 Shell thickness: 0.6 Fill Bottom/top thickness: 0.6 Density: 10% Speed in mm/s Print:30 Travel: 50 Bottom layer: 30 Infill: 50 Temp. in deg. C. Head: 200 Bed: 60 Support Type: Everywhere Platform adhesion: Raft Retraction Speed: 77mm/s Distance: 0.7mm Initial layer thickness: 0.3mm Sign off: This 4 to 1 Splitter combines all the 4 outlets of the Boyu-4000B air pump into 1 outlet, driving the aerated water from the reservoir of nutrient solution, up the tube and to the Silencer, which then drips onto the bottles containing growth media (e.g. gravel) and the items that you wish to grow, making up a 3D printed hydroponics system: www.3dponics.com/wiki/instructions-drip-system/
Source: www.thingiverse.com/thing:771827 #CraftBot 3D printer from #CraftUnique. Slicer: Cura 15.02.01 Print time: 22m Quality In mm Layer height: 0.3 Shell thickness: 0.6 Fill Bottom/top thickness: 0.6 Density: 10% Speed in mm/s Print:30 Travel: 50 Bottom layer: 30 Infill: 50 Temp. in deg. C. Head: 200 Bed: 60 Support Type: Everywhere Platform adhesion: Raft Retraction Speed: 77mm/s Distance: 0.7mm Initial layer thickness: 0.3mm Sign off: This 4 to 1 Splitter combines all the 4 outlets of the Boyu-4000B air pump into 1 outlet, driving the aerated water from the reservoir of nutrient solution, up the tube and to the Silencer, which then drips onto the bottles containing growth media (e.g. gravel) and the items that you wish to grow, making up a 3D printed hydroponics system: www.3dponics.com/wiki/instructions-drip-system/