How I Installed and Calibrated Klipper on My Sovol SV06 3D Printer

In this video I document my journey installing and calibrating Klipper on my Sovol SV06. Happy Printing! If you want to install Klipper on your 3D printer, you would need to download the software and follow the instructions provided by the manufacturer. Klipper is a firmware that runs on a microcontroller board and allows for advanced features and highly precise printing. Typically, you would need to flash the firmware onto the board using a computer connected to the printer through a USB cable. Once the firmware is installed, you can configure the settings and use Klipper with your favorite slicer software to create high-quality 3D prints. It is important to note that installing new firmware can be risky and may void your printer's warranty, so make sure to follow the manufacturer's instructions carefully and PROCEED AT YOUR OWN RISK. Github Resources: Firmware - https://github.com/spinixguy/Sovol-SV06-firmware Firmware & Guides - https://github.com/bassamanator/Sovol-SV06-firmware Klipper Installer & Update utility - https://github.com/th33xitus/kiauh Sovol Links: https://sovol3d.com/products/sovol-sv06-direct-drive-3d-printer https://www.amazon.com/Sovol-Planetary-Extruder-25-Point-8-66x8-66x9-84/dp/B0BJV3WB2J SV06 All Metal Hotend Planetary Direct Drive 3D Printer Auto Leveling PEI Plate 32 Bit Silent Board Fully Open Source My Klipper Config with Macros: https://drive.google.com/file/d/1ToTX0A4iqqRQi9Ysxk8Npe1pe2lvycVd/view?usp=sharing My PrusaSlicer Config: https://drive.google.com/file/d/1EguMw5qWq1EuAa8bA83RkL-wJvDyUFhg/view?usp=drive_link Sovol Bed Plate STL and PNG for PrusaSlicer https://drive.google.com/file/d/1TWsjcNlpyMx-sWfG5Q2hVOtzdHcEuExu/view?usp=drive_link Other Places to find me: Facebook - https://m.facebook.com/100090116522964/