IT Task - SuperLab 3 CCNA part 1 (INDONESIA)

Part 1 - Basic Configuration Configure hostname in all of routers & switches same as display name Configure enable secret in all of routers & switches as "cisco" Part 2 - Configure VLAN & Trunking in SW1 & Core-RTR2 Create VLAN & set the vlan name as display Configure allowed VLAN to only permit exist VLAN in the trunk interface Configure portfast in all of interfaces that connected to Server Configure Router On Stick on Core-RTR2 Bellow is the address detail of the VLAN. Core-RTR2 will use first IP Address of the VLAN Configure Manual IP Address on the servers DNS Server - 192.168.1.2/24 Web Server - 192.168.1.3/24 Email Server - 192.168.1.4/24 In the end of this section, make sure that all servers can ping to the Core-RTR2